RJ45 Connector (NA622-5018731R)

Model NO.: NA622-5018731R

1.MATERIAL:
  1.1 Housing:thermoplastic plastics
  1.2 terminals:Copper Alloy
    Gold plated in contact area:
    Tin plated in termination
    Nickel Plated overall
  1.3 Shell:Steel&Copper Alloy
      Nickel Plated overall
 
2.ELECTRICAL CHARACTERISTICS:
   2.1 Rating Current :1 Ampere
   2.2 Rating Voltage :125 V Max/USB 30 V Max
   2.3 Contact Resistance:40 Milli ohms/USB3.0 50Milli ohms
   2.4 Insulation Resistance:500 Mega ohms Min/USB3.0 100Mega ohms Min
 
3.MECHANICAL CHARACTERISTICS:
   3.1 Connector Mating force:35N MAX(3.57Kgf)
 
4.ENVIRONMENT CHARACTERISTICS:
   4.1 Operating temperature:-40ºC to +85ºC
   4.2 Storage temperature:-40ºC to +85ºC

LED Driver is an essential part to DC12V and DC24V Led Modules and led strips. They are with IP classification IP20 and IP67 to satisfy indoor and outdoor use.

LBY could provide different drivers to meet your needs, they are high transfer efficiency, stable constant voltage output,both indoor & outdoor use suitable, 100% full loading, 100% burn-in tested,overload/short circuit protection. 

LBY12150FLLBY12030FL

How to connect single color LED strips with led drivers?

led strip with diver

RGBW strips with led drivers?

RGBW strip with driver

Installation Tips:

Please identify the power supply`s input and output before installation.

Ensure correct output + & - wire connection. Power on after wire connection is done.

To avoid voltage drop and loading capacity wasting on the output extension wire, please install the power supply to the loading as near as possible, if must use long extension wires, thicker wires and less loading wattage is required.

The power supply to be installed at good ventilation and cooling environment.


Led Driver

Led Driver,Dimmable Led Driver,Rgb Led Driver,Power Led Driver

SHENZHEN LINGBENYANG IND. CO., LTD. ,

Posted on